Status
Conditions
Treatments
About
Lumbopelvic fixation is the treatment opation for spinopelvic dissociation. In our study we will compare unilateral versus bilateral lumbopelvic fixation as regarding functional outcomes by Majeed score along a period of 12vmonths as a primary measure and metal failure,skin condition and nonunion as secondaries.
Full description
Traumatic loss of connection between the spine and pelvis can adopt many forms including lumbosacral fracture dislocation and bilateral sacroiliac dislocation. However, the term spinopelvic dissociation refers to a pathological condition in which this dissociation occurs due to the association of a transverse fracture with sagittal fractures in both sacral wings, result-ing in a proximal segment with the vertebral spine and the proximal sacral fragment, which is mechanically separated from a distal segment formed by the pelvic girdle and the rest of the sacrum.
Spinopelvic dissociation is an important entity to recognize because these fractures are almost uniformly unstable with a very narrow set of criteria for conservative management .
The mechanism of injury includes a very high energy trauma with axial compression on the sacrum.
Various options for internal fixation have been proposed, including percutaneous iliosacral screws, transiliac bars, sacral rods, posterior small plates, or vertical stabilization alone .
Some authors have introduced the technique of triangular posterior osteosynthesis (TPO) in the treatment of vertically unstable pelvic fracture..This is a biplanar fixation able to counterbalance the forces on the posterior pelvic ring during unipodal stance, so as to allow early weight-bearing. The stability of fixation could be confirmed by biomechanical testing of human specimens with transforaminal sacral fractures submitted to cyclic loading. The load to failure of the commonly used internal fixation techniques (sacroiliac screw fixation, plating limited to the sacrum) amounted to 60% of the load to failure of triangular stabilizations. In order to perform the triangular osteosynthesis, we used the Click'X system (Synthes, Oberdorf, Switzerland). Pedicle screws were first inserted in the pedicle of L4. Subsequently caudal screws were implanted into the iliac bone, through the posterior-superior-iliac-spine and parallel to the sacroiliac joint. Once the four screws were inserted, reduction was carried out. Connecting rods were inserted and tightened initially only over the proximal pedicle screws of L4.
The pedicle screws were used as ''joysticks'' in order to achieve reduction in the vertical and horizontal direction at this point, the connecting rod was tightened over the distal screws, therefore stabilizing the fracture. In order to obtain stabilization in the horizontal plane a 6-mm rod was inserted as atransversal cross-link between the two longitudinal connecting rods.e used the Click'X system (Synthes, Oberdorf, Switzerland). Pedicle screws were first inserted in the pedicle of L4. Subsequently caudal screws were implanted into the iliac bone, through the posterior-superior-iliac-spine and parallel to the sacroiliac joint. Once the four screws were inserted, reduction was carried out. Connecting rods were inserted and tightened initially only over the proximal pedicle screws of L4.
The pedicle screws were used as ''joysticks'' in order to achieve reduction in the vertical and horizontal direction at this point, the connecting rod was tightened over the distal screws, therefore stabilizing the fracture. In order to obtain stabilization in the horizontal plane a 6-mm rod was inserted as a transversal cross-link between the two longitudinal connecting rods.
Enrollment
Sex
Ages
Volunteers
Inclusion criteria
Exclusion criteria
Loading...
Central trial contact
Essam Kamal, resident; Mahmoud Badran, lectature
Data sourced from clinicaltrials.gov
Clinical trials
Research sites
Resources
Legal