Status
Conditions
Treatments
Study type
Funder types
Identifiers
About
This prospective, non-randomized, single-arm, proof-of-concept clinical trial evaluates the physiological performance and safety of the Ventijet System, a hybrid ventilation system based on continuous high-velocity gas flow. The system was conceived during the coronavirus disease 2019 (COVID-19) pandemic as a response to ventilator shortages, building upon a previously patented continuous-flow nozzle system developed by Dr. Lucas Picazo in the 1990s. The concept combines the physiological benefits of continuous flow ventilation (CFV) with the potential ease of design, monitoring, and scalability.
Patients with moderate acute respiratory distress syndrome (ARDS) - defined by a ratio of arterial partial pressure of oxygen to inspired oxygen fraction (PaO₂/FiO₂) between 150 and 200 mmHg - were first stabilized on a conventional mechanical ventilator (Puritan Bennett 840, PB840) using lung-protective settings. They were then transitioned to the Ventijet system following a structured protocol that included real-time monitoring and esophageal pressure measurements.
The primary endpoint was oxygenation, measured as the change in PaO₂ after one hour of ventilation with the Ventijet system compared to baseline values under conventional ventilation. The study was designed to demonstrate non-inferiority, with a predefined margin of ±20 mmHg in PaO₂.
Secondary outcomes included carbon dioxide clearance (PaCO₂), respiratory system mechanics, safety events, and feasibility in intensive care unit (ICU) conditions.
Full description
This is a prospective, interventional, single-center clinical study conducted to evaluate the physiological effects and safety of a novel ventilation system-continuous flow ventilation with Ventijet-in adult patients diagnosed with moderate acute respiratory distress syndrome (ARDS). The objective was to compare gas exchange and pulmonary mechanics between conventional pressure-controlled ventilation and the Ventijet system, which delivers continuous flow through a high-velocity nozzle.
Ventijet is a prototype mechanical ventilator developed during the COVID-19 pandemic, motivated by the urgent need for scalable and physiologically effective ventilatory support. The system builds on the concept of continuous-flow extratracheal jet ventilation (VC-ET), originally described and patented by Dr. Lucas Picazo in the 1990s. It generates a high-speed continuous gas stream via a proximally placed nozzle (tobera), which creates an expiratory braking effect. This facilitates alveolar recruitment throughout the respiratory cycle while maintaining low airway pressures and small tidal volumes. Unlike classical jet systems, Ventijet integrates real-time safety monitoring and operates using time-cycled, volume-controlled settings, making it suitable for intensive care unit (ICU) use.
Inclusion and Exclusion Criteria
Patients were screened in the ICU and included if they met all of the following:
Exclusion criteria included:
Study Protocol and Ventilation Phases
All patients were first stabilized on a conventional ICU ventilator (Puritan Bennett™ 840) with lung-protective settings:
Once stability was confirmed, patients remained on these settings for 1 hour (Conventional-1h phase), after which a full dataset was collected, including:
Patients were then transitioned to the Ventijet system using end-expiratory clamping to avoid alveolar derecruitment. Ventijet parameters were adjusted to approximate the previous conventional settings. After 1 hour on Ventijet (VJ-1h phase), the same dataset was recorded. This timepoint served as the primary comparison for non-inferiority analysis of oxygenation (PaO₂).
Patients who remained stable on Ventijet continued for up to 24 hours. Additional datasets were collected at 6, 12, and 24 hours (VJ-6h, VJ-12h, VJ-24h). Afterward, they were reconnected to the conventional ventilator (again using end-expiratory clamping), and evaluations were repeated at 1, 12, and 24 hours post-reconnection (Post-VJ-1h, Post-VJ-12h, Post-VJ-24h).
Monitoring and Data Collection Each study phase was supervised continuously by a trained investigator. A CARESCAPE™ B650 monitoring system (General Electric™) was used to capture ventilatory and hemodynamic parameters. Active humidification was maintained throughout. Deep sedation (RASS -5) was ensured during all Ventijet phases.
Variables collected at each phase included:
Outcomes
Safety and Oversight
Adverse events were continuously monitored. Protocol mandated immediate reconnection to the conventional ventilator in case of:
The study was conducted in compliance with Good Clinical Practice (GCP) guidelines and was externally monitored by the Clinical Research Support Unit (SEIC) at Biocruces Bizkaia.
Enrollment
Sex
Ages
Volunteers
Inclusion criteria
Exclusion criteria
Primary purpose
Allocation
Interventional model
Masking
14 participants in 1 patient group
Loading...
Data sourced from clinicaltrials.gov
Clinical trials
Research sites
Resources
Legal