Status
Conditions
Treatments
About
Development of Laparoscopic surgery skills for general surgery residents are considered competencies of major importance. Different tools are used for this purpose, including synthetic models, virtual reality, animal models and human cadaveric specimens preserved by freezing.Cadaveric models share the anatomical similarity, however have some clear disadvantages including the biological risk and the alteration of the mechanical properties of the bodies preserved by this technique, such as tissue rigidness, lack of elasticity and consistency, and the impossibility of achieving adequate pneumoperitoneum. However, we previosly devoleped a formaldehyde free solution for anatomical preservation. Hence. we propose a a single-center, single-blind, randomized educational intervention clinical trial. Research participants who meet the inclusion criteria have a theoretical and practical module on the acquisition of skills in laparoscopy and take a pre-test focused on intracorporeal enterorrhaphy. Subsequently, they are randomized by blocks into three groups: Negative Control, Positive Control, and Intervention, continuing their training in skill acquisition models, silicone models, or Formaldehyde-free solution preserved corpses, respectively. Finally they are evaluated with a post-test. Two blind experts will evaluate participants using the GOALS and OSATS scales for laparoscopic surgery.
Full description
General surgery residents (GSR) face several challenges throughout their training, including learning and developing laparoscopic surgery skills (LSS). For GSR, who are constantly subjected to training in minimally invasive interventions, which require training in different skills than traditional surgery - such as minimal invasive manual dexterity, two-dimensional spatial perception and positioning different operating tools amongst others - simulation training (ST) plays an important role in the transition of knowledge acquisition and development of technical expertise during surgical training; The main challenge of ST in minimally invasive surgery is to recreate an environment that achieves both the basic physical parameters and provides decision-making experience during surgery, being its final objective mastering the use and location of the instruments to minimize possible errors during real life surgery. Since the inception of the concept of ST several simulation tools have been created to answer the challenges of training, however evidence suggest that frozen human or animal cadaveric models are the most preferred option by GSR.
Cadaveric models, frozen or fresh, share an anatomical similarity with real practice scenario and accurately reflect the characteristics of human tissues and thus are currently ideal for ST and development of (LSS), however, they present clear disadvantages and limitations that make their use difficult, specially the biological risk and the alteration of the mechanical properties of the bodies preserved by this technique, such as tissue rigidness, lack of elasticity and consistency, and the impossibility of achieving adequate pneumoperitoneum. In response to this issue, there are a variety of preservation techniques that do not use formaldehyde or use minimal amounts of this reagent, however these techniques present their own problems, such as elevated costs, complexity, and poor quality of preservation.
In previous work in our lab, a formaldehyde-free solution was developed and presented as a new preservation solution that claims to maintain -to a certain extent- the color, texture, rigidity, and elasticity of the tissues, allowing the clear identification of anatomical structures, and the creation of adequate pneumoperitoneum at representative low pressures for laparoscopic ST (+/- 5mmHg) after multiple tests. The corpses preserved with this solution can be used for surgical simulation, as they preserved the pose no biosafety risks comparable to those of fresh human tissues, can be reused, and pulse arterial flow can be generated by using an external peristaltic pump articulated with the system.
To our knowledge there is no evidence of the use of human cadaveric specimens preserved with formaldehyde free solutions in LSS development, whereby the aim of this manuscript is to evaluate the use of cadaveric specimens preserved with a formaldehyde free preservation solution as an alternative training tool to develop basic LSS and determine the existence of equivalence between this model and two widely used dry training models.
MATERIALS AND METHODS Design A single-center, single-blind, randomized educational intervention clinical trial was carried out to compare the use of formaldehyde free solution cadaver training in laparoscopic surgery with other traditional simulation surgery options. The trial was approved by our Institutional Research Board, prior to the beginning of the study (Act. No.201910224). Written informed consent was obtained from each participant and the CONSORT statement was followed.
Study Population Medical students who completed their general surgery rotation and general surgery residents of any training level were eligible. Recruitment and selection of the participants was carried out by a formal open invitation through email to the General Surgery coordinators of local University Hospitals and Faculties of Medicine; Likewise, a formal invitation was made to the National Association of Scientific Societies of Medical Students Informed consent was given to all interested parties, and the objective and methodology of the study were explained, as well as the implications of their participation. The interested parties who agreed to voluntarily participate signed the informed consent.
Study Groups All participants received a shared training module divided in a virtual theorical phase of 20 minutes and a hands-on training phase in a Dry Simulator using Jacobeaus simulators of the Cut & Stitch ® brand. Three skills were practiced (cutting, suturing, and transferring) and each skill was trained for 20 minutes per participant, alternately with active breaks every 60 minutes until the proposed training time was completed. The shared module finished with a pretest consisting in integrated task simulation of an enterorrhaphy using laparoscopic approach, using pelvitrainer® with a fresh porcine bowel specimen. After all participants completed the shared module, they were randomized divided into Group A (negative control), Group B (positive control) and Group C (intervention). All three groups were exposed to a training program based on three specifics tasks to make it comparable. These tasks were variations of cutting exercises, suturing exercises and transfer exercises, all of them performed using laparoscopic technique. However, different simulators were used in each group.
Analysis Subgroups: analysis subgroups were created to enhance control and intervention comparison. These subgroups were defined as follows:
Subgroups were randomly assigned to all three arms including negative control, positive control and intervention.
Design of the Pre-test and Post-test Each test was composed of a predetermined evaluation space in which the participant must perform the simulation of an intracorporeal enterorrhaphy with the support of another participant as an assistant, which was recorded and evaluated according to the Objective Structured Assessment of Technical Skills (OSATS), and the Global Operative Assessment of Laparoscopic Skills (GOALS). Pre-test was defined as the evaluation phase in which participant had only accessed the first shared module. Post-test was defined as the evaluation after randomization. Prior to each test, fresh porcine viscera were assembled inside a pelvitrainer like those used during the training phases, the predisposed trocars were provided, and the instruments were provided next to the pelvitrainer without labels or additional identification marks on the piece. The Mindray HD3 tower laparoscopy camera with 30-degree lens was used.
Masking and Randomization Techniques A single-blind randomized trial was carried out. Participants were included consecutively in groups with a maximum of 6 people for each intervention date. When each participant was included, an anonymous code was assigned to each person, which was then used for identification in the tests, allowing the linking of the results of each pre-test and post-test video. This allows the subsequent analysis of blinded and categorized data according to the level of training and/or anonymous sociodemographic variables obtained from the surveys carried out at the beginning of the study.
Randomization was performed in blocks of 6 in a 2:2:2 ratio using a sealed envelope that contained the intervention or control in which they would participate after taking the pre-test, this process was carried out by an external researcher. The envelopes were prepared by a third party in blocks of 6 each two of them containing one of the three interventions and were previously randomized before being handed out. Inside the envelopes was a piece of paper with the assigned intervention, carbon paper and aluminum paper to prevent anyone from reading the contents when backlit. Before opening the envelope both the participants and one of the researchers signed it, and due to the carbon paper, the sheet with the intervention was signed as well. The participant had no previous knowledge of the information consigned in the envelope and after that, he/she carried out the assigned activities and a post-test.
After capturing the data all test videos were blinded by participant, date, and type (pre-test or post-test) by assigning a 4-digit code generated randomly using the randomize tool between a number less than 1,000 with the command =random.between (=randombetween) from Excel, created and assigned specifically for this study by a third party investigator that would capture and analyze the data. These codes were the only information available to the two evaluators who tabulated the GOALS and OSATS scores ensuring blinding in the analysis. After the assignment of the code and masking the videos, the evaluators were given a password-restricted access folder in a subfolder of OneDrive "Personal Vault", hosted in an institutional Outlook account to access the videos identified with said code.
Outcomes
Statistical analysis The minimum detectable difference in the assessment and validation scales used was employed to obtain a sample size of n=37 study participants. Inter-observer variability was assessed by means of a concordance test with Cohen's kappa coefficient, however, due to the characteristics of the data collected, a Bland-Altmann difference test (difference plot) was required. Evaluation of the comparability of the two variables was done using the final score of each pre-test and comparing it with other pre-test, as well as comparisons between the pre-test and post-test for each participant and the weighted value for the pre-test vs the weighted value for the post-test.
Subsequently, a comparative analysis was carried out between the three groups (negative control, positive control and intervention) to assess whether they are comparable. Finally, a principal element analysis (PEA) was carried out, discriminating the analysis by educational level, previous training level and possible confounding variables. All analysis were performed using the STATA 17, R and Pas tools, available on the servers of our University.
Enrollment
Sex
Volunteers
Inclusion criteria
Exclusion criteria
Primary purpose
Allocation
Interventional model
Masking
37 participants in 3 patient groups
Loading...
Data sourced from clinicaltrials.gov
Clinical trials
Research sites
Resources
Legal