Status
Conditions
Treatments
Study type
Funder types
Identifiers
About
Sixty periodontally diseased patients will be enrolled in the study. After the patients are randomly divided into one of three treated groups, group 1 (n=20), SRP only; group 2 (n=20), SRP + i-PRF; and group 3 (n=20), P + Cip-loaded i-PRF. Clinical parameters (probing depth [PD], clinical attachment level [CAL], gingival index [GI], plaque index [PI], and level of IL6 in the GCF from baseline to 1 and 3 months of follow-up).
Full description
The current randomized, controlled, parallel-design study will be conducted at Suez Canal University's Oral Medicine and Periodontology Department following approval of the study design by the Institutional Review Board and Ethics Committee (931/2024).
Murugan et al. (2024) published a formula that will be used to determine the clinical trial's sample size. According to the following inclusion and exclusion criteria, the study population will be chosen from the subjects who visited the outpatient section of the Department of Oral Medicine and Periodontology Department, Suez Canal University, ion, the sample size was 20 in each group.
Randomization
A computer-generated randomization list utilizing RANDOM.ORG software (www.random.org) with a 1:1 allocation ratio will be used to allocate patients at random to the SRP (control), SRP+I-PRF, or SRP+CIP-loaded I-PRF groups. A non-recruiting faculty member (RA) issued each participant a number, which was then hidden in opaque, sealed envelopes. When adjunctive therapy will be applied, the sealed envelope will be opened to disclose the allocated treatment, and the number will be chosen by the RA for concealment.
Blinding Because it will be unavoidable for the participants and the physician performing the nonsurgical procedure (SH) to be blinded to the interventions, this RCT will be blinded, with the statistician and outcome assessors (MA) blinded.
Patient grouping:
According to the treatment procedure, all 60 selected patients will be randomly allocated to one of the three groups:
Group 1 (n=20): This group will be treated only with SRP without any adjunct therapy.
Group 2 (n=20) After SRP, this group will be treated with the delivery of drug-free i-PRF into the periodontal pocket and gingival tissue adjacent to the pocket. The i-PRF will be applied only once.
Group 3 (n=20): Ciprofloxacin-loaded i-PRF will be administered to this group's periodontal pocket and gingival tissue next to the pocket wall following SRP. Throughout the course of the study, the i-PRF will be used just once.
Preparation of ciprofloxacin solution
Based on the research of Murugan et al., 2024, the ciprofloxacin medication concentration to be loaded in i-PRF will be determined. After a 14-day observation period, their study found that a medication concentration of 1 mg/mL will be biocompatible, have the highest efficacy, and demonstrate a sustained release of 59% of the loaded drug. Just before the participants' blood is drawn, one milligram of the medication will be weighed, combined with 100 μL of deionized water, and shaken for 30 seconds to make the drug fully soluble.
Collection of i-PRF
The i-PRF will be prepared by the same operator using the procedure developed by Miron and Choukron in 2017. This protocol involves obtaining 10 mL of intravenous blood by venipuncturing the participant's antecubital vein under sterile conditions. Immediately after collection, the blood will be centrifuged in a sterile, simple test tube without an anticoagulant for three minutes at 700 rpm and 70 g force. The blood splits into two layers after centrifugation: the top layer is composed of platelet-rich fibrin plasma, which is still liquid, and the bottom layer is composed of a compartment for red blood cells. The top layer of platelet-rich fibrin will be aspirated using a 2-mL syringe and then locally administered into the periodontal pocket for group II.
Preparation of ciprofloxacin-loaded i-PRF
To create a homogeneous mixture with a final concentration of 1 mg/mL, PRF will then be distributed in a vial containing a 1-mg/100 μL solution of ciprofloxacin and gently shaken for 10 seconds. (Murugan1 & Jayakumar 2023)
Local Delivery of Ciprofloxacin-loaded i-PRF
Before it turns into a gel in the group III participants, this combination will also be placed right away into a 1-mL insulin syringe and injected into the periodontal pocket until it fills the pocket and overflows into the tissue next to the periodontal pocket. As previously mentioned, plain i-PRF will be administered to group II participants at the experimental sites. All study participants received postoperative instructions. None of the subjects had a prescription for mouthwash or any other medications, and they will be asked to return for follow-up after one or three weeks.
Clinical assessment
The clinical parameters of the target sites will be measured using a William's probe (Dentsplay, USA) at baseline, 1 month, and 3 months after the treatment. The periodontal parameters included *plaque index (PI) , (Silness & Loe 1964),
To determine the plaque index of the patients, their dental plaque thickness will be evaluated by probing the mesial, distal, buccal, and palatal surfaces of all teeth using a Williams periodontal probe. The plaque index of an individual will be determined by summing the values obtained for each tooth and calculating the averages. To determine the plaque index, Silness & Löe (14) reference values were taken as a basis:
Plaque index 0: No plaque is in the area adjacent to the gingiva. Plaque index 1: There is a plaque in the form of a thin film on the gingival margin.
Plaque index 2: There is a visible plaque in the gingival pocket and gingival margin.
Plaque index 3: There is a dense plaque in the gingival pocket and on the gingival margin.
*gingival index (GI),
To determine the gingival index of the patients, gingival bleeding caused by running a Williams periodontal probe inside the pocket on the mesial, distal, buccal, and palatal surfaces of all teeth will be evaluated. The gingival index of an individual will be obtained by summing the values determined for each tooth and calculating the averages. To determine the gingival index, Löe & Silness (15) reference values were taken as a basis:
Gingival index 0: Healthy gums. Gingival index 1: Mild discoloration and edematous gingiva. No bleeding on probing.
Gingival index 2: Red, edematous, and shiny gingiva. There is bleeding on probing.
Gingival index 3: Red, edematous, and ulcerated gingiva. There is spontaneous bleeding.
Collection of GCF for IL6 detection
GCF samples will be collected from one area from a tooth showing PPD ≤ 5 mm with the highest clinical signs of both inflammation. Supragingival plaque will be removed using a sterile curette without touching the gingival margins, and the area will be gently dried. Cotton rollers were then used to isolate the area in order to avoid contaminating it with saliva. Filter paper (Periopaper, Proflow; Amityville, NY, USA) was used to collect GCF. After carefully inserting paper strips into the gingival sulcus until they encountered only slight resistance, they were left there for 30 seconds. Blood- and saliva-contaminated strips were thrown away. Following the measurement of the GCF volume of each strip using precalibrated electronic impedance equipment (Periotron 8000, ProFlow; Amityville, NY, USA), the strips will be promptly placed into sterile polypropylene tubes and kept at -80°C until analysis.
Each filter paper strip's GCF will be eluted into PBS in the following manner: samples will be kept at 4°C for two hours before the IL-6 tests. After each strip was raised to the eluent's surface, 350 μL of PBS was added, for a total final volume of 600 μL. The samples were then centrifuged for 10 minutes at 10,000 rpm and chilled for an additional 20 minutes at 4°C. The strips will be eventually thrown away.
IL-6 will be analyzed using commercial ELISA kits (R and D Systems, Abingdon, Oxon, UK). A quantitative "sandwich" enzyme immunoassay method is used in the kit. A 96-well microplate will be precoated with an anti-human monoclonal antibody specific to IL-6. In the presence of IL-6, the immobilized antibody bound it. Each well received 200 μL of an enzyme-linked (horseradish peroxidase) polyclonal antibody specific for IL-6 (goat antihuman) following the washing of unattached proteins.
200 μL of a substrate solution will then be added, and the amount of IL-6 that will be bound in the first stage was shown by the color that appeared. Using a microplate reader set to 450 nm with wavelength correction set to 540 nm, the color intensity (optical density) will be determined in 30 minutes. By plotting the concentration of the IL-6 standards (2000, 1000, 500, 250, 125, 62.5, 31.2, and 0 pg/mL) against their optical density, a standard curve was created, and the IL-6 concentration was ascertained. The IL-6 concentration (pg/mL) was then calculated by dividing the amount of IL-6 by the GCF volume (μL), and the pg of IL-6 in each sample (total amount) was computed. The ELISA assays will be performed twice, and the concentrations and total quantities of the cytokine will be determined using the mean values.
Enrollment
Sex
Ages
Volunteers
Inclusion and exclusion criteria
Inclusion criteria
Exclusion Criteria:
Primary purpose
Allocation
Interventional model
Masking
60 participants in 3 patient groups
Loading...
Data sourced from clinicaltrials.gov
Clinical trials
Research sites
Resources
Legal