Status
Conditions
About
The purpose of the study is to verify and validate the parameters collected from mobile devices via the app named "Comestai" and from reference devices. The assessments considered to define comorbidities are included.. Specifically, collection of vital parameters (Blood Pressure, Heart Rate, Respiratory Rate, Oxygen Saturation) through the "Comestai" Application via mobile phones (using photoplethysmographic method) and reference devices such as Withings-Blood Pressure Monitor Connect® (for Blood Pressure), Polar Verity Sense® (for Heart Rate), Masimo-finger sensor® (for Oxygen Saturation, Respiratory Rate), comparing and confirming them. Consent will be sought for the viewing and collection of blood test results that are normally included in evaluations for subjects with overweight and/or obesity and/or diabetes.
Estimated time required for each measurement recording: 10-15 minutes per subject
Total number of subjects: 3000
Full description
Early detection of variations in vital parameters allows for the identification of changes in patients' health status and the provision of recommendations for therapeutic adjustments. The application named "Comestai" is a non-invasive and easy-to-use tool that enables the measurement of vital parameters. The app allows users to simultaneously measure vital parameters such as Heart Rate (HR), Respiratory Rate (RR), Oxygen Saturation (SpO2), and Blood Pressure (BP) using the photoplethysmographic method with the front camera of a mobile device.
The use of simultaneous vital parameter measurement systems like apps can enhance self-monitoring of health status and improve patient care. In this study, vital parameters will be measured using the "Comestai" application and compared and validated with measurements from standard clinical practice devices.
Consent will be sought for the viewing and collection of biochemical evaluation results typically required for individuals with overweight and/or obesity and/or diabetes.
"Comestai" Application: This wellness app allows for non-invasive measurement of vital parameters, enabling users to detect SpO2, HR, RR, and BP by looking at the front camera of a mobile device ("By Face"). The measurement method used is Remote Photoplethysmography (rPPG).
This is a prospective, open-label, study to collect vital parameters using the Comestai application by looking at the front camera of a mobile device ("By Face"). The measurement method of the app is Remote Photoplethysmography (rPPG).
The study plans to enroll up to 3000 subjects
Each subject will be assigned a specific identification number (Subject ID). During the evaluation, the following data will be recorded in the Electronic Case Report Form (eCRF):
Medical history of the subject Current or past therapies Demographic data (date of birth, sex) Smoking habits Physical characteristics (height in meters, weight in kilograms, Body Mass Index in kg/m^2, and phototype)
During the 'By Face' measurement of vital parameters with the app, subjects will be asked to sit in a comfortable place, looking at the phone screen (about 25 cm away) with their face fully uncovered (no masks, hats, or any facial accessories). During data collection, the subject should remain still and breathe steadily. The subject will be required to look directly at the camera throughout the data collection process. The 'By Face' data collection mode can be performed on both iOS and Android in parallel, with both devices positioned in front of the subject. HR and blood pressure will also be measured immediately before and after the app measurement.
Data Collection Equipment
For vital signs data collection using the "Comestai" application, the study staff will use the following mobile phones for rPPG "By Face" measurements:
rPPG "By Face" vital signs data collection includes videoing the subjects' faces with a mobile device (iOS and Android) front camara for approximately 1.5 minutes.
Vital signs data using the reference devices (i.e., SpO2, RR, BP, PR) will be collected continuously for approximately 1.5 minutes, and simultaneously to the data collected using the "Comestai" application (i.e., "By Face").
Several data collection events (1.5 minutes each) may be performed per subject using the "Comestai" application and reference devices.
BP will be collected using the reference devices prior to data collection using the Comestai application and immediately after completion of data collection using the Comestai application.
During "By Face" data collection, the subjects will be requested to sit in a comfortable place, looking at a screen (distance of ~25cm) with a fully exposed face (not to wear a mask, hat, or any kind of accessory on the face). During data collection, the subject breathing should be stable with minimum movements. The subject will be requested to stare directly towards the camara during the whole data collection process.
"By Face" mode of data collection can be taken for both iOS and Android in parallel when both devices are positioned in front of the subject.
During the "By Face" data collection, SpO2 levels will be monitored continuously using the standard reference device.
Consent will be sought for viewing and collecting the results of pre-scheduled blood tests. Participation is optional, and subjects who do not consent can still proceed with the parameter measurements. In case of acceptance, the following results will be considered:
Complete Blood Count (Hemoglobin, White Blood Cell Count, Neutrophils, Lymphocytes, and Platelets), Hemoglobin Glycosylated (HbA1C), Lipid Profile (Total Cholesterol, Cholesterol-LDL, Cholesterol-HDL, and Triglycerides), Glucose, Alanine transaminase (ALT), Creatinine.
Estimated participation time per subject: approximately 10-15 minutes.
No medical decisions will be based on data obtained through the "Comestai" application, reference devices, or blood sample results.
All data will be recorded in the study's eCRF.
The analysis plan involves verifying and validating the parameters collected from mobile devices via the app and from reference devices, as well as results of pre-scheduled blood tests and patient demographic data. For all parameters, the accuracy of the app measurement compared to the reference device and standard tests will be assessed.
Confidence intervals will be calculated using the bootstrap method. The correlation between measurements using the app and those using reference devices and standard tests will be evaluated using the Pearson correlation coefficient. The agreement between the two measurements (app and reference devices/and standard tests) will be represented using Bland-Altman plots.
Enrollment
Sex
Ages
Volunteers
Inclusion criteria
Prior to enrollment in this study, subjects must meet all the following inclusion criteria:
Exclusion criteria
Subjects will be excluded from the study if any of the following conditions are present:
In addition to the Inclusion/Exclusion criteria, the 70% of target population should include adult subjects with at least one of the following:
Note: the same subject can have more than one of the above medical conditions. It is preferred that subjects will be treatment- naive for the medical condition they suffer from or are not under treatment at the time of participation (e.g. a subject who suffers from hypertension has not started his treatment to lower his blood pressure).
Loading...
Central trial contact
Gianvincenzo Zuccotti, MD, Prof; Valeria Calcaterra, MD
Data sourced from clinicaltrials.gov
Clinical trials
Research sites
Resources
Legal